Rapid Set - Skim Coat

Quick Overview

    • Excellent bond strength
    • Apply feather edge to 1”
    • Top with flooring 1-hour
    • Top with epoxy in 16-hours
    • Workable for 20-minutes
    • Mold and mildew resistant
    • No primer required
    • No curing compound required
    • Easy to use – just add water
    • Hydraulic cement based
Interested in this item or want more information?

Hours:

Phone: (301) 773-4700

Email: orders@atlantic-supply.com

Can't find what you want? Give us a call and we can help you find it.

Details



DESCRIPTION:
Rapid Set® Skim Coat is a high bond strength, fast curing, smooth (unsanded), hydraulic cement based material used for floor underlayments, concrete repairs, patching and skim coating on interior and exterior projects. Apply and finish from feather-edge to 1”.

APPLICATIONS
Use Rapid Set® Skim Coat to repair, level and smooth concrete substrates prior to the installation of floor coverings such as VCT, sheet vinyl, carpet, tile, pavers, epoxy toppings and other coatings. Most Floor coverings can be installed over Rapid Set® Skim Coat in 1-hour. Coatings and epoxy toppings can be applied over Rapid Set® Skim Coat in 16-hours. Please comply with instructions from the floor covering manufacturer regarding allowable substrate moisture and moisture testing.

PRODUCT ADVANTAGES
  • Excellent bond strength
  • Apply feather edge to 1”
  • Top with flooring 1-hour
  • Top with epoxy in 16-hours
  • Workable for 20-minutes
  • Mold and mildew resistant
  • No primer required
  • No curing compound required
  • Easy to use – just add water
  • Hydraulic cement based
PHYSICAL PROPERTIES
Setting Time [ASTM C-191] Initial Set @ 70°F (21°C) – 25 minutes Final Set @ 70°F (21°C) – 40 minutes Compressive Strength [ASTM C-109 (mod.)] 3 hrs: 1000 psi 24 hrs: 1500 psi 7 day: 2000 psi 28 day: 3000 psi

SURFACE PREPARATION
Bonding surfaces must be clean, sound, and free from any materials that may inhibit bond such as oil, dirt, asphalt, sealing compounds, acids, wax, and loose debris. Do not use acid etching, solvents, or adhesive removers as means of cleaning the substrate. Smooth concrete surfaces should be mechanically abraded by scarifying, grinding, shot-blasting or other approved methods. The minimum temperature for the substrate must be 50ºF (10ºC). In hot ambient temperatures, pre-wet the substrate with water before applying Rapid Set® Skim Coat. Concrete substrates should be free of hydrostatic pressure.

FIELD TESTS
Conduct field tests using the prepared substrate and finished floor covering to determine if Rapid Set® Skim Coat is suitable for your intended use.

MIX
Mix using a 1/2'” drill mixer with a mixing paddle, or a margin trowel for small jobs. Use 4 quarts of clean water per 20-lb bag. First add the water to mixing container, then add the dry Rapid Set® Skim Coat. Mix for 2 to 3 minutes. Do not add additional water after initial mixing. Adding more water than recommended may induce clumps and air voids in the finished product. Do not add any additives or admixtures except Rapid Set® Set Control® retarding admixture to extend working time and Flow Control® to increase the flow of the product. Contact CTS Cement for more information about the use of these additives.

PLACING
After mixing, screed, trowel and/or float to achieve the desired finish. The working time of Rapid Set® Skim Coat is approximately 15-20 minutes at 70ºF (21ºC) ambient temperature. CURE: Rapid Set® Skim Coat does not require water curing or curing compound.

COVERAGE & PACKAGING
Rapid Set® Skim Coat is available in 20-lb (9.1-kg) bags. One 20-lb bag will have skim coat coverage of 66.6 ft2 at 1/8” depth or 33.4 ft2 at 1/4” depth. Coverage may vary due to jobsite conditions.

MANUFACTURER
  • CTS Cement Manufacturing Corp.
  • 11065 Knott Ave. Suite A
  • Cypress, CA 90630
  • Phone: 800-929-3030
  • Web: www.rapidset.com
  • E-mail: info@rapidset.com


  • LIMITED WARRANTY
    CTS Cement Manufacturing Corp. warrants its material to be of good quality, and, at its sole option, within one year of sale, will replace defective materials or refund the purchase price thereof and such replacement or refund shall be the limit of CTS's responsibility. Except for the foregoing, all warranties, express or implied including merchantability and fitness for a particular purpose are excluded. CTS shall not be liable for any consequential, incidental, or special damages arising directly or indirectly from the use of the material.

    CAUTION
    Rapid Set® Skim Coat contains cementitious materials and may cause irritation to lungs, eyes, and skin. Avoid contact. Use only in adequate ventilation. Do not breathe dust. Wet mixture may cause burns. Wear suitable gloves, eye protection, and protective clothing. In case of skin contact, wash thoroughly with soap and water. In case of eye contact, flush immediately and repeatedly with large quantities of water and get prompt medical attention. In case of difficultly breathing, remove person to fresh air. If difficulty breathing persists, seek medical attention.

    Click Here to stay informed about Rapid Set® Skim Coat and learn more about product uses and performance - high bond, fast curing, smooth (unsanded) finish, feather edge to 1”, hydraulic cement based, underlayment, concrete repair and skim coat.

    Additional Information


    Manufacturer: Rapid Set

     
    © Atlantic Hardware Supply | All Rights Reserved