Details
TriggerFoam Pro - Standard Polyurethane Expanding Foam
Product Description :
TriggerFoam Pro is a one part polyurethane expanding foam which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the nozzle. The surface of the foam initially dries within 1-5 hours and becomes fully cured in 12-15 hours. TriggerFoam Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.
General Applications and Uses :
TriggerFoam Pro is dispensed through a special gun that allows the user to control the rate of flow as well as the size of the bead for more precise placement of the product, allowing it to be used in a wide variety of applications. Use it to fill, seal or insulate. It blocks drafts, stops leaks, saves energy, adheres to all types of construction materials, deadens sound, acts as a buoyancy material once cured, controls radon, helps confine asbestos fibers, and can be used in HVAC applications.
Insulating : Around window frames, sills, door frames floor/wall joints Refrigeration units and pipes Electrical junction boxes Attics Air conditioning systems Filling : Breaches in walls Sound Dampening Voids in concrete forms Pipe penetrations in non-fire rated walls Underground ductwork Features and Benefits : CFC Free Propellant Class B2 Flame Retardant Physiologically Harmless When Fully Cured Contains no Urea Formaldehyde or PCB'S Does Not Rot Or Deteriorate With Age Low Odor High Foam Yield – Up To 1.8 Ft3 Per 29 Oz. Can Easily Adjustable Applicator Can Dispense Foam Beads As Small As 1/8” Hardened Steel Dispenser Tip For Longer Life On Metal Tools Precision Valve Helps Prevent Pressure Loss And Prolongs Shelf Life Stop And Go Application Product Remains Liquid In Applicator Until Dispensed Minimal Subsequent Expansion (± 10%) Compatible With PVC VOC: 176 g/L Approvals and Listings : Underwriters Laboratory (UL Listing) – File No. R16754, Caulkings and Sealants
- Tested in accordance with UL 723 “Test for Surface Burning Characteristics of Building Materials”
- Applied to Inorganic Reinforced Cement Board tested as applied in two 3/4"
diameter beads, 5" OC covering 12.5 percent of the exposed test area:
Flame spread 5
Smoke developed 10
Tested in accordance with ASTM E 90 (Sound Transmission Classification 60), ASTM C 518 and ASTM C 423
View Product Specification View Material Safety Data Sheets
English