6 Gas Sample Drawing Monitor


RKI Instruments

RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. The EAGLE 2 available features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges; Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases.

Quick Overview

    Monitor up to 6 different gases PPM, % LEL, or % Vol. auto-ranging combustible detection H2 Specific LEL/PPM detection Multilingual (5 languages) Powerful long-life pump up to 125’ range Low flow pump shut off and alarm Methane elimination for environmental use Alkaline 16 hours or NiMH 18 hours capability Password protection Datalogging standard Auto calibration / single gas calibration Internal hydrophobic dust filter External probe with hydrophobic filter Ergonomic RFI / EMI / chemical / weather resistant enclosure Intrinsically safe design, CSA approval
Interested in this item or want more information?


Phone: (301) 773-4700

Email: orders@atlantic-supply.com

Can't find what you want? Give us a call and we can help you find it.



Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.


9.5” L x 5.25” W x 5.875” H


3.8 Lbs (standard 4 gas with batteries)

Detection Principle

Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.

Sensor Life

2 Years under normal conditions.

Sampling Method

Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH


3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.


Readout can display in 5 languages (English, French, German, Italian, or Spanish.


2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.

Alarm Method

Buzzer 95 dB at 30 cm, four high intensity LED’s.


4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.

Continuous Operation

At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.

Power Source

4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).

Operating Temp. & Humidity

-20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.

Response Time

30 Seconds to 90% (for most gases) using standard 5 ft hose.

Safety Rating

Intrinsically Safe, Class I
Groups A, B, C, D.

Approvals: CSA / CE

Standard Accessories

Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter

Optional Accessories

  • Dilution fitting (50/50)
  • Ni-MH batteries
  • Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation function
  • Extension hoses


Two year material and workmanship, one year for PID sensor

Specifications subject to change without notice. 

Additional Information

Manufacturer: RKI Instruments

© Atlantic Hardware Supply | All Rights Reserved