MASA/MASAP Mudsill Anchors

Quick Overview

• Use all specified fasteners.


• MASA/MASAP 


• - Concrete shall have a minimum f'c = 2500 psi.


• - Spalling — Full loads apply for spalls up to a maximum height of 1 1/4" and a maximum depth of 7/8". Any exposed portion of the mudsill anchor must be protected against possible corrosion.


• - For prescriptive anchor spacing refer to table.


• - Testing shows that these mudsill anchors can be used in lieu of code required anchor bolts and square washer in high seismic zones. Refer to flier F-C-MASA for additional information. 


• - Minimum MASA end distance is 4" and minimum center-to-center spacing is 8" for full load. 


• - For continuous load path, MASA should be installed on the same side of wall as uplift connectors.